Wireless transmissions over distances in excess of 80 km

InfiLINK 2x2 Wireless Point-to-Point Solution

InfiLINK 2x2 is a highly diversified family of wireless Point-to-Point products which brings together capacity up to 280 Mbps with a rich set of features and cost effectiveness.

It consists of the two sub-families:

  • InfiLINK 2x2 PRO - high performance series
  • InfiLINK 2x2 LITE - cost-effective medium capacity series

All InfiLINK 2x2 products are available across a number of licensed and unlicensed frequency bands with selection of integrated antenna and connectorized models.

Frequency Bands

  • 3.1 — 4.0 GHz
  • 4.9 — 6.0 GHz
  • 6.0 — 6.4 GHz


Key applications of the InfiLINK 2x2 Family include:

  • 4G/LTE BTS backhaul
  • WISP infrastructure backhaul
  • High-capacity "last mile" access infrastructure
  • CCTV access and backhaul infrastructure
  • Building-to-building connectivity at Fast Ethernet or higher speeds for private and enterprise networks
  • A cost-effective alternative for legacy microwave links or wired leased lines
  • Reliable backup for fibre lines, high-speed FSO or millimeter-wave links

Key Features and Highlights

  • Multiple Input - Multiple Output (MIMO 2x2) innovative technology

  • “Pay as you grow” software upgradeable capacity feature

  • Small form factor models allow low visual impact deployments

  • Advanced Quality-of-Service and networking feature set

  • Reliable and robust design

InfiLINK 2x2
Top Facts Sheet

Field-proven performance
  • 200+ Mbps links at the distances of 30 km and above
  • High-gain integrated antenna units suitable for 50+ km hops
  • Sophisticated automatic modulation and Tx power control algorithms
Sophisticated interference mitigation and frequency planning toolkit
  • Instant DFS techology allowing zero downtime dynamic frequency selection and non-invasive spectrum scan
  • Spectrum analysis tool supporting multiple modes for in-depth review
  • TDD synchronization support by InfiLINK 2x2 PRO models
  • 125 kHz minimal centre frequency adjustment step
  • Multiple channel widths supported
    • 5/10/20/40 MHz for 5 and 6 GHz bands
    • 3.5/5/7/10/14/15/20/28/30/40 MHz for 3.x GHz bands
Products designed with specific customer needs in mind
  • InfiLINK 2x2 LITE is the solution of choise for solar-powered sites
    • power consumption as low as 7 W
    • input DC range from 9 to 56 VDC
  • CCTV ready products
    • InfiLINK 2x2 LITE units with PoE out second Ethernet port allow direct connection of 802.3af compliant surveillance cameras and thus eliminating excessive cabling
    • Gigabit Ethernet enabled InfiLINK 2x2 PRO units are ideally suited for inherently assymmetrical CCTV backhauls providing full capacity one-way
    • IGMP Snooping and multicast server features are instrumental achieving best utilization of the whole network infrastructure
  • ATEX/HAZLOC/IECEx certified models
    • Allowed to be installed at oil rigs, natural gas disctribution stations and other hazardous locations
Ruggedized design
  • IP66/IP67 compliant dust and water protection
  • Built-in lightning protection
  • Operating temperature range: –40..+60º C (optional extended temperature range: –55..+60º C)
The most comprehensive networking feature set
  • Full-fledged L2 switch supporting VLAN, Q-in-Q, STP, etc.
  • Static and dynamic routing
  • Sophisticated QoS functionality
  • Unique network resilience and management capabilities though proprietary MINT network architecture


Synchronization Unit AUX-ODU-SYNC Synchronization Unit AUX-ODU-SYNC

Is a TDD synchronization hub, which has been designed to provide a timing reference to InfiMAN 2x2 base station sectors as well as to InfiLINK 2x2 PRO units

Lightning Protection Unit AUX-ODU-LPU-G Lightning Protection Unit AUX-ODU-LPU-G

Is an optional outdoor Lightning Protection Unit (LPU) for InfiNet Wireless systems.

Lightning Protection Unit with Injector AUX-ODU-INJ-G Lightning Protection Unit with Injector AUX-ODU-INJ-G

Is an outdoor DC injector with built-in lightning protection compatible with all InfiNet Wirelss outdoor units.

Alignment tool CAB-RV1 Alignment tool CAB-RV1

Is a lightweight and easy-to-use diagnostic tool

View all Accessories